Part of the latest generation of WyreStorm 4K extenders for the latest generation of 4K HDR content, the EX-70-H2 features dynamic compression technology to enable high frame rate HDR-10 and HLG content to be transmitted over standard 10Gbps HDBaseT, both visually losslessly and without latency.

Technical Specifications

AUDIO & VIDEO

Inputs

TRANSMITTER
1x HDMI: 19-pin type A

RECEIVER
1x HDBaseT 8-pin RJ-45 female

Outputs

1x HDBT: 8-pin RJ-45 Female
1x HDMI Loop: 19-pin type A

1x HDMI: 19-pin type A

Output Video Encoding

HDBaseT™ Class A

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (microseconds)

Audio Formats

2ch PCM | Multichannel up to DTS-X and Dolby Atmos

Video Resolutions (max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | Dolby Vision @ 30Hz | HLG | HDR-10

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

HDBaseT

HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, and RS-232

CEC

CEC Pass-through – Requires CEC compatibility between source and display

IR

1x IR TX: 3.5mm (1/8in) TS Mono
1x IR RX: 3.5mm (1/8in) TRS Stereo

RS-232

1x RS-232: 3-pin Terminal Block

POWER

Power Supply

18V DC 1A

PoH

IEEE 802.3af 48V 15.4W Max | 2-way

Max Power Consumption

4.68W

Additional Features

• HDBaseT™ Class B transmission of 4K HDR up to 70m/230ft and 1080p @60Hz 36bit up to 100m/328ft
• Full UHD 4K transmission supporting HDMI 2.0 video standards
• Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable
• Low profile chassis of 15mm for easier, more convenient installations behind screens at display zones
• Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos
• Switchable RS-232 function mode on transmitter and receiver for firmware update
• Threaded bushings allow use of both standard and locking DC power plugs
• Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal
• Cable termination follows IEEE-568B standards
• Automatically adjusts feedback, equalization and amplification of signal for easy installation
• Energy efficient universal power supply included

In the Box

• 1x EX-70-H2 v2 Transmitter
• 1x EX-70-H2 v2 Receiver
• 1x IR Emitter
• 1x IR Receiver
• 2x 3-pin Terminal Block
• 1x 18V DC 1A Power Supply (US/UK/EU)
• 4x Mounting Brackets (2x for TX | 2x for RX)
• 1x Quickstart Guide