Part of the latest generation of WyreStorm 4K extenders for the latest generation of 4K HDR content, the EX-35-H2 features dynamic compression technology to enable high frame rate HDR-10 and HLG content to be transmitted over standard 10Gbps HDBaseT, both visually losslessly and without latency.

Technical Specifications

AUDIO & VIDEO

Inputs

TRANSMITTER
1x HDMI: 19-pin type A

RECEIVER
1x HDBaseT: 8-pin RJ-45 Female

Outputs

TRANSMITTER
1x HDBT: 8-pin RJ-45 Female

RECEIVER
1x HDMI: 19-pin type A

Output Video Encoding

HDBaseT™ Class A

Encoding Data Rate

18Gbps

End to End Latency

10μs (microseconds)

Audio Formats

2ch Analog/PCM | Multichannel: LPCM

Video Resolutions (max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR and RS-232

IR

1x IR TX 3.5mm (1/8in) Mono | Bidirectional over HDBaseT
1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT

RS-232

1x 3-pin Screw Down Phoenix Connector | Bidirectional over HDBaseT

POWER

Power Supply

18V DC 1A

PoH

48V 15.4W

Max Power Consumption

8.88W

Additional Features

• 4K UltraHD extender set capable of transmitting AV content over medium
  distances using single cable Cat6 cable
• Full UHD 4K transmission supporting HDMI 2.0 video standards
• Supports all high definition resolutions including 4K UHD @30hz 4:4:4 24bit | 4K HDR @24Hz 4:2:0 10bit (BT.2020) – see specifications for details
• Revised chipset increases compatibility with new 4K UHD source devices
• Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable
• Low profile chassis of 15mm for easier, more convenient installations behind screens at display zones
• Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos
• Switchable RS-232 function mode on transmitter and receiver for firmware update
• Threaded bushings allow use of both standard and locking DC power plugs
• Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal
• Cable termination follows IEEE-568B standards
• Automatically adjusts feedback, equalization and amplification of signal for easy installation
• Energy efficient universal power supply included

In the Box

• 1x EX-35-H2 Transmitter
• 1x EX-35-H2 Receiver
• 1x 18V DC 1A Power Supply (US/UK/EU)
• 2x 3-pin Screw Down Phoenix Connectors
• 1x IR Emitter
• 1x IR Receiver
• 4x Mounting Brackets (2x for TX | 2x for RX)
• 1x Quickstart Guide