The NetworkHD 500s series is an HDMI 2.0 AV over IP solution. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. A powerful routing engine allows audio, video, USB and control signals to be discretely sent to any endpoint. Create captivating video walls up to 16×16 in size and control them with the tap of a button in the amazing NetworkHD Touch control app.

Technical Specifications

AUDIO & VIDEO

Inputs

TX:
1 x HDMI 2.0b
1 x 3.5mm TRS Audio

RX:
1 x S/PDIF (Toslink)

Outputs

TX:
1 x 5-pin Balanced Audio
1 x S/PDIF Digital

RX:
1 x HDMI 2.0b
1 x 5-Pin Balanced Audio

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision/HDR/HLG
1920x1080p @60Hz 12bit

Audio Formats

Passthrough: 2ch PCM and up to DTS:X and Dolby Atmos
ARC: 2ch PCM and up to Dolby Digital+ and DTS 5.1

Supported Standards

DCI | RGB | USB

Maximum Pixel Clock

600Mhz

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max 850Mbps

End-to-End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | CEC | EDID | ARC

LAN

1x 1GbE 8-Pin RJ45
1x 1Gb SFP:
(1000Base-SX: 550m using OM3 MMF)
(1000Base-LX: 5km using SMF)
(1000Base-LX10: 10km using SMF)

IR

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

RS-232

1x 3-Pin Phoenix Connector | 2-way | API Programmable

Communication Protocols

Telnet | TLS | SSH | HTTP | HTTPS

USB

TX:
1 x USB 2.0 Type Host

RX:
2 x USB HID Type A
1 x USB 2.0 Type A (up to 300Mbps upstream)

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

In the Box

• 1x NHD-500-TX or NHD-500-RX
• 1 x IR Emitter
• 1x IR Receiver
• 1x Pair of Rack Brackets
• 1x Pair of Wall Brackets
• 1x 3-pin Terminal Block
• 1x 5-pin Terminal Block