You are not logged in. Would you like to log in now?

Login Now

PIR1680PT | Microprocessor PIR With 65 lb. Pet Immunity & Temp Alert Sensor

Brand: Napco
Product Code: PIR1680PT
Categories:  Sensors

Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify NAPCO sensor technologys innovation, increasing dependability without compromising intruder catch sensitivity. For applications where animal/pet immunity is key, the PIR1680PT supports 65lb. (29kg) pet protection within its 45 (13.7m) range. Or, the original model PIR1680, has a 50 (15.2m) range and offers nominal 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection in both models is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signaturesenabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also feature a built-in temperature sensor at no additional chargeso you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or dcor, pets or perishables are ravaged by heat extremes, otherwise left unchecked. Features:
  • 45 x 45 range
  • 65 lb pet/animal Immunity
  • Room-temp alert temperature monitoring provides auto-alert at 40*F - 90* F
  • Look-down/creep zone
  • D.C.I.D. Technology - detect & compare imaging diagnostics for advanced false and true alarm detection
  • Active self test mode
  • Exceptional RFI-/EMI/lightning shielding of key components
  • Lens bank available, including long range, barrier, and specialty ranges
  • Wall or corner mountable
  • Tamper supervised
  • Form A relay


Technical Specifications:
  • Microprocessor: 2K ROM with A-D Converter
  • Operating temperature: -10 to +50 degrees C (14o to 122o F)
  • Freeze damage alert: 40oF (4oC)
  • Heat damage alert: 90oF (32oC)
  • Mounting: Wall or corner, 12 (3.6m) max.; For pet/animal applications 7 (2.1m) is recommended.
  • Output relay: Form A; normally closed
  • Relay time: Approx. 3 seconds
  • Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
  • Multi-mode Trouble Output (Open collector)
  • Self-Test Interval: 11 - 16 hrs.
  • Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel.

This site contains some product and catalog data provided by Icecat. Therefore please see the Icecat "AS IS" disclaimer.